I have two new projects coming up, .223 sub sonic and .303 sub sonic
Right now, its the .223.
Does anyone have any starting points for this reload?
I am thinking of perhaps a heavier bullet, just to try one up on the .22 subsonic , it will be pointless making a .223 that is no more than a .22 subsonic.
The .22 subsonic heaviest bullet is the 60 gr, but it will usually not stabilize in most .22 barrels, the usual .22 subsonic appears to be a 40 gr bullet.
Will a 70 grain .223 type bullet stabilize at subsonic speeds in a 1-9 barrel?
The heavier the bullet the easier it is to get a speed below 1100fps. So a 70gr bullet should work well.
https://hodgdon.com/wp-content/uploads/2020/07/subsonic-data-final.pdf
Hi Oom Drie, looked at that, but at 55 gr, I may as well just use the over counter .22 LR sub-sonic.
Was wondering along the lines of SOMCHEM as well S265 or S221 perhaps.
Herewith data with MP200. 3gr MP200 with 69gr Sierra Match King. Predicted speed 1130fps. You would need to fill the void with Dacron.
What length is the barrel - I used 22 inch.
18 " - the one I built for Cody nearly 10 years ago. Ruger All American
My Quickload has gone beserk, the screen has changed and most loads show "startup pressure too high" Huh ???
Start up pressure is 3626 psi
Whats changed ? Why?
Did have a power induced PC blow up and everything reinstalled ?
Reduce that pressure to 1500psi and the calcs are there again. I am battling to post photos from my PC. How do I do that on this forum, as I only get a URL choice.
Herewith image I wanted to post.
temp.png
Thank You, you always come through.
After much battle I came up with 1063 fps - but I was using 223 Remington SAAMI you use just 223 Remington, Why ?
When I started asking about sub sonic reloading I was told repeatedly to go as heavy as possible, simply because the low speed is the limit. Heavier makes for better penetration.
Hornady makes a 90gr bullet. One should be able to seat it fairly deep in the case.
A rifle case with 3 grains of powder in it ?
Software does not predict a SEE for you.
Quote from: 414gates on Sep 29, 2022, 07:01 AMA rifle case with 3 grains of powder in it ?
Software does not predict a SEE for you.
I shoot my 308 with 5gr of MP200 for 800fps with 173gr LRN.
The reason why I took the speed so low is to stay clear of the transsonic zone. I had some trouble with that in my .22LR.
I will now see if I can find some heavy .223 bullets, would like to find a lead cast bullet actually.
Twist rate might upset any plans of bullets heavier than 75gr in a 1 in 9 twist. Treeman should check that twist rate.
Quote from: 414gates on Sep 29, 2022, 07:01 AMA rifle case with 3 grains of powder in it ?
Software does not predict a SEE for you.
Have a look at this data from Hodgon.
https://hodgdon.com/wp-content/uploads/2020/07/subsonic-data-final.pdf
Twist rate does not work the same for subsonic bullets. The aerodynamic force is less than a quarter compared to supersonic flight. This reduces the overturning moment considerably.
A 1-12 should be enough to stabilise 80gr bullets comfortably, if not heavier.
Secondly, round nose bullets is much better aerodynamically speaking for subsonic flight than spitser ogives.
Quote from: janfred on Oct 01, 2022, 05:24 AMTwist rate does not work the same for subsonic bullets. The aerodynamic force is less than a quarter compared to supersonic flight. This reduces the overturning moment considerably.
A 1-12 should be enough to stabilise 80gr bullets comfortably, if not heavier.
Secondly, round nose bullets is much better aerodynamically speaking for subsonic flight than spitser ogives.
*********************************
I was of the opinion that the faster the bullet the less twist needed, the slower the bullet the more the twist?
This inside the usual rules for length of bullet in regard to twist, the fast you shoot a bullet the more you can back of one the twist?
Therefore if your twist is a
bit on the slow side, you can sometimes over come that with more velocity.
Or what ?
Bear with me.
On a long bullet the centre of gravity is behind the centre of pressure. The air pushes back from the front through the centre of pressure and the weight pushes from behind through the centre of gravity causing an overturning moment. The magnitude of this moment is directly related to the distance between the two points and the force acting through them. To overcome this, we spin the bullet. The rate we spin it depends on the size of the overturning moment, i.e. length and speed of the bullet.
Basically, the faster the bullet goes the higher the force, the more RPM you need. For the rest of the explanation to make sense you have to think about RPM and force instead of twist and velocity.
Subsonic the force acting on the bullet is much less than in the supersonic or transonic zones. Hence the less RPM required.
A standard drag curve shows it very well. In the supersonic regime, the drag is high, reducing quickly to through the transonic zone to low when subsonic.20221016_235244.jpg
Thanks for that. First time I think I actually got the underlying reason for different twist rates.
Quote from: oafpatroll on Oct 17, 2022, 09:07 AMThanks for that. First time I think I actually got the underlying reason for different twist rates.
***************************************** :o
Ha ha - Ja, me not being so clever, well I am still figuring it out. This - "The rate we spin it depends on the size of the overturning moment, i.e. length and speed of the bullet "
And then the ? -Why do we use slower ie 1-14 for a 40 gr .223 but a faster twist 1 - 8 for the 70 gr .223 bullet.
I am not questioning the validity of your scientific fact, just trying to get past some mental block.
Quote from: Treeman on Oct 17, 2022, 10:48 AMQuote from: oafpatroll on Oct 17, 2022, 09:07 AMThanks for that. First time I think I actually got the underlying reason for different twist rates.
And then the ? -Why do we use slower ie 1-14 for a 40 gr .223 but a faster twist 1 - 8 for the 70 gr .223 bullet.
That holds true for supersonic bullet speeds (which is what we are all accustomed to working with). Subsonic bullet speed is a different animal and the variables like bullet shape and weight, as well as twist rate do not have the same influences relative to one another as they do at supersonic speeds.
Quote from: Treeman on Oct 17, 2022, 10:48 AMQuote from: oafpatroll on Oct 17, 2022, 09:07 AMThanks for that. First time I think I actually got the underlying reason for different twist rates.
***************************************** :o
Ha ha - Ja, me not being so clever, well I am still figuring it out. This - "The rate we spin it depends on the size of the overturning moment, i.e. length and speed of the bullet "
And then the ? -Why do we use slower ie 1-14 for a 40 gr .223 but a faster twist 1 - 8 for the 70 gr .223 bullet.
I am not questioning the validity of your scientific fact, just trying to get past some mental block.
A heavier bullet has a larger tendency to stray and therefore needs more spin to keep it in check.
Does the general mantra then hold true in your opinion, use the heaviest bullet for subsonic loads.
I have found this to be untrue unless the barrel is changed for subsonic - heavy bullets.
Quote from: Treeman on Oct 17, 2022, 10:39 PMDoes the general mantra then hold true in your opinion, use the heaviest bullet for subsonic loads.
I have found this to be untrue unless the barrel is changed for subsonic - heavy bullets.
********************
:o You posted while I was asking.
Quote from: Ds J on Oct 17, 2022, 10:30 PMQuote from: Treeman on Oct 17, 2022, 10:48 AMQuote from: oafpatroll on Oct 17, 2022, 09:07 AMpast some mental block.
A heavier bullet has a larger tendency to stray and therefore needs more spin to keep it in check.
*********************************
You sound like a priest - speaking of the bullet who lost its way along the righteous path and strayed of target.
Quote from: Treeman on Oct 17, 2022, 10:39 PMDoes the general mantra then hold true in your opinion, use the heaviest bullet for subsonic loads.
I have found this to be untrue unless the barrel is changed for subsonic - heavy bullets.
Provided you stay away from the transonic zone, yes. Anything faster than 950fps you take your chances.
Quote from: janfred on Oct 18, 2022, 04:03 AMQuote from: Treeman on Oct 17, 2022, 10:39 PMDoes the general mantra then hold true in your opinion, use the heaviest bullet for subsonic loads.
I have found this to be untrue unless the barrel is changed for subsonic - heavy bullets.
Provided you stay away from the transonic zone, yes. Anything faster than 950fps you take your chances.
The transsonic zone gave me trouble with my .22 and standard ammunition. For some reason, standard ammunition deviated from 940fps up to 1200fps, especially on hot days. It gave erratic groupings - up to two flyers for every five shots.
After I changed to supersonic (high velocity) and subsonic ammunition, the groupings became more consistent.
When I loaded 173gr LRN for my 308, I stuck to 800fps to say clear from the transsonic zone.
For some reason, the accuracy is not very good yet. I still get flyers now and then.
Do the flyers go sideways through the target at 100m?
Quote from: Ds J on Oct 18, 2022, 09:29 AMQuote from: janfred on Oct 18, 2022, 04:03 AMQuote from: Treeman on Oct 17, 2022, 10:39 PMDoes the general mantra then hold true in your opinion, use the heaviest bullet for subsonic loads.
I have found this to be untrue unless the barrel is changed for subsonic - heavy bullets.
Provided you stay away from the transonic zone, yes. Anything faster than 950fps you take your chances.
The transsonic zone gave me trouble with my .22 and standard ammunition. For some reason, standard ammunition deviated from 940fps up to 1200fps, especially on hot days. It gave erratic groupings - up to two flyers for every five shots.
After I changed to supersonic (high velocity) and subsonic ammunition, the groupings became more consistent.
When I loaded 173gr LRN for my 308, I stuck to 800fps to say clear from the transsonic zone.
For some reason, the accuracy is not very good yet. I still get flyers now and then.
*************************
You having erratic ignition, I found my subsonics to be stupid accurate. 800 fps is just to slow, here on the coast we stay at 1000 - 1040, even the late 900+ fps. Below this funny things seem to happen.
Also, get a proper over powder wad, use quite a bit of toilet paper or cotton wool even a sheet of paper cut in a circle pushed in with a pencil, then kapok, I put a lot in,almost a compressed load, just get better ignition.
I must buy another sedate caliber rifle and play again.
The reason for heavy bullets is that lighter bullets need very small charges so as to not exceed the speed of sound. The extra weight of the bullet needs more oomph and charges then increase in volume and tend to give better consistency and then accuracy.
Quote from: Tripodmvr on Oct 18, 2022, 05:41 PMThe reason for heavy bullets is that lighter bullets need very small charges so as to not exceed the speed of sound. The extra weight of the bullet needs more oomph and charges then increase in volume and tend to give better consistency and then accuracy.
********************************
Which is the exact opposite of hyper sonic reloading where heavier has less charge than lighter bullets
Quote from: Treeman on Oct 19, 2022, 07:45 AMQuote from: Tripodmvr on Oct 18, 2022, 05:41 PMThe reason for heavy bullets is that lighter bullets need very small charges so as to not exceed the speed of sound. The extra weight of the bullet needs more oomph and charges then increase in volume and tend to give better consistency and then accuracy.
********************************
Which is the exact opposite of hyper sonic reloading where heavier has less charge than lighter bullets
Correct yes. The whole exercise of going subsonic is a field of its own. The rules that apply are such that it needs careful study and following the recipes that have been found to be safe through practical experimentation.