Some nice 3D printed 12G reloading gear

Started by oafpatroll, Dec 09, 2023, 02:13 PM

Previous topic - Next topic

oafpatroll

I came across a guy selling 3D printed reloading gear on the S&O Market app. Being light a few powder bushes for my MEC reloader and having found some files for them I contacted him and enquired.

Went to go and collect the first two test samples today and picked up some of this other clever items at the same time.

I roll crimp buck and slug loads so the hull clamp will come in very handy as my typist wrists start taking strain at anything much beyond 100.

The hull trimmer is by far the best design I've come across and makes perfectly square cuts. My janky homemade ones and the much more fiddly version I bought from ASP have just been given early retirement.

The stars of the show though are the bushes. They are a perfect fit and look like they will work perfectly. Will be testing them tomorrow.

I'm glad I overcame my mistrust of 3D printed stuff as these are seriously robust items and he reckons that they can still be made more than twice as strong by increasing the infill.

http://www.bushmunki.co.za/

     

Treeman

Het geen idee wat daai goed is ?

That for 12 G ? _ Whats the green thing with a bolt on top ?
I am who I am - I am not who you want me to be.
Therefore I am me.

oafpatroll

The green things are a hull trimmer and a spanner for adjusting the depth of cut to set up shells for for roll crimping.

Red cylinder shaped things are powder charge bushings for MEC reloaders. Bushings fit in the bar on the right and provide the cavity that meters the charge.

The red thing on the bottom right is a hull clamp. You use it when roll crimping on a drill press. I've always just put a rubber pad under the shells and held them in place but it does get tiring if you load a lot at a time which I tend to do

oafpatroll

The bushings are a win. They work great and with a couple of very small tweaks they will be perfect. The top flange needs to be made a hair thicker so that it can be polished down to sit flush with the surface of the bar and the angle from the barrel to the edge of the flange needs to be made less acute so there is less of a knife edge. The originals have a vertical edge parallel to the barrel of a hair under a mm. The #30 bushing threw 12 charges of S121 that had a variation of 1.1% which in shotgun reloading terms is benchrest quality.

NoStepOnSnek88

Here's a link to Bushmunki's (Kevin) YouTube channel that features a few of his products.

https://youtube.com/@BushMunki?si=sLTWqUnj-TsEO6Lg

Here's a link to his product catalogue via Google Drive.

https://drive.google.com/file/d/1d5lrzC7HvMWg6Qghnmqv1939SmzHe6ux/view?usp=drivesdk

a true Hoplophile, this is the way.
How To Fight Gun Control South Africa 🇿🇦
Telegram Main Group Link: https://t.me/+qzLqIPl_FEg1ZDA0

oafpatroll

Picked up the improved versions of the bushings yesterday and they are a win. Kevin printed them at twice the resolution, increased the size of the numbering font, reversed it so that it's proud of the surface and increased the height of the top surface by .2mm so that it comes out slightly proud of the charge bar and can be polished down smooth and flush. They fit perfectly and throw really consistent charges.

30 and 32 on the right are V1 the rest V2


NoStepOnSnek88

a true Hoplophile, this is the way.
How To Fight Gun Control South Africa 🇿🇦
Telegram Main Group Link: https://t.me/+qzLqIPl_FEg1ZDA0

Treeman

These product producers really need promoting.
I am who I am - I am not who you want me to be.
Therefore I am me.

Ds J

#8
Hi Folks, does anyone have contact details for Bushmunki?

The email address does not deliver.

Edit: WhatsApp number found.