I understand that the primers are 'set' on seating, i.e. they get slightly compressed so the compound is close enough to the firing pin and ...

Got to fire one of these once as a young man and remember thinking that my CZ75 had a trigger so much better that I pittied the krauts who had to wiel...

My experience is that I require slightly less propellant to achieve book velocities for cast when powder coating. Have to assume the stuff is slidier ...

Thanks, most interesting. If my toy budget was in better shape or had realistic prospects of improvement collecting would be something I'd love t...

I stand corrected then.Maybe I should test my SWC cast bullets I use for my 38Spl in my 357 Mag and see if I still get decent accuracy.Using cast lead...

Yip, about 1800 ft/sec seems to be the upper velocity limit of lead / PC bullets.This is the velocity I get from my 357 Magnum rounds when firing out ...

Nice write-up. The couple of Russian AKMs that I have fondles over the years really impressed in terms of their fit and finish.

My "shake and bake" method did not go as planned.  I can coat them and load the bullets, fire them in my 9mmP and 762x39, but about 2/3...

These bullets are for a 357 revolver that I don't yet have in hand so I don't know how well they'll do but all the other stuff I make w...

Looking for a Lee .358 sizing die.As usual I'd like to try second hand first before going to the dark side.******************************If you c...

Thanks but on second sober thoughts I'll leave well enough alone. I don't get to hunt so have no real use for them and lots of other pressin...

I'd be interested in taking a few of those off your hands for gits and shiggles. Of the three cast and powdercoated bullet loads I developed for ...